|
|
 |
Check Valves
LKC disc check valves are engineered exclusively for use in stainless steel pipe installations to prevent reverse flow. Their precise design and durable build make them reliable, high-performance valves for a variety of applications. Two types are available – vertical and horizontal. In both, the tough valve body consists of two parts, held together with a clamp and sealed with a sanitary gasket. Internally, the valves consist of a valve cone with guide legs, and they incorporate an o-ring seal. Seat alignment is carefully maintained with an internal guide plate. The C45MP fractional check valve is available in 316 stainless steel with PTFE ball or PTFE plug with spring.
Ball Check Model 45BYMP ball check valve is available in 1-1/2" to 3" sizes with molded Buna-N, Viton or a solid Nylon ball. Body design allows full flow and can be used in conjunction with air blow check valve.
Air Blow Check Our air blow check valve is designed to evacuate lines of product or CIP solution and for air agitation of product in tanks and other vessels. Air drying of lines permits formation of protective oxide film: the key to placing a system in its most corrosion-resistant condition. Thus, the air agitation thoroughly mixes and blends product to improve product uniformity and quality. The disposable air filter media, designed for use with the air blow valve, will filter out the impurities in air placed under pressure for drying out process tubing after it has been cleaned and rinsed. It also serves as a filter for air used in the air agitation of products in tanks or vessels. |
| C45MP Fractional Check Valve |
 |
| 45BYMP Ball Check Valve |
 |
| Air Blow Check Valve |
 |
| LKC Disc Check Valve |
| |
|
|
